Remington Hair Dryer D 3200N User Guide

®
®
ProAir Ceramic  
Model D-3200N  
Please Read  
Prior to Use  
 
1. This hair dryer is provided with an  
appliance leakage circuit interrupter  
(ALCI) safety device built into the plug.  
This device is designed to make the  
unit inoperable under some abnormal  
conditions, such as accidental immer-  
sion in water. The ALCI safety device  
is equipped with a test button so that  
its operation can be checked.  
2. Should the ALCI safety device trip (i.e., reset  
button pop out) during use, press the reset  
button. Should the dryer fail to reset, return  
the dryer to Remington Customer Service for  
examination and repair or replacement.  
Never operate this appliance if it has been  
dropped in water; return it to Remington  
Customer Service for examination and repair  
or replacement.  
This unit should be tested before each  
use to confirm that the safety device is  
operational.  
3. The dryer is designed to work on ordinary  
household current only, 125 volts A.C.,  
60 Hz. It is not intended for commercial use.  
4. This appliance is equipped with an automatic  
thermal limiter which will cycle off when  
overheated and come back on when cooled  
down. If the unit cycles off, unplug the cord  
for several minutes before restarting.  
TO TEST:  
After plugging in your hair dryer:  
A. Press the reset button on the  
ALCI device.  
B.Press the test button. The reset button  
will pop out. This verifies that the  
safety device is operating properly.  
5. This appliance has a polarized plug (one  
blade is wider than the other). As a safety  
feature, this plug will fit in a polarized outlet  
only one way. If the plug does not fit fully in  
the outlet, reverse the plug. If it still does not  
fit, contact a qualified electrician. Do not  
attempt to defeat this safety feature.  
C.Press the reset button to reactivate  
your ALCI safety device.  
D.Your hair dryer is now ready for use.  
Note: This unit may automatically trip  
when unplugged. If so, unit must be  
reset after it is plugged in. After  
following the above testing procedure,  
should the indicator device not function  
properly, return the dryer to Remington  
Customer Service for examination and  
repair or replacement.  
 
®
ProAir Ceramic Features  
• 1875 Watts  
Air  
Intake  
Grille  
• Ceramic radiant heat technology  
• 4 heats and 2 speeds for styling control  
• Cool Shot locks in style  
Chrome Barrel  
• Air Intake Grille – wipes clean easily  
• Hang Loop for convenient storage  
• Concentrator for straightening and spot drying  
• Safety plug with test and retest features for  
immersion shock protection  
Concentrator  
• UL listed  
Two-year warranty  
Cool Shot Button  
Speed Settings  
Ceramic  
Coated Grille  
Ceramic Radiant Heat Technology  
Ceramic emits far-infrared, radiant heat  
to help dry water molecules inside the  
hair strand. This fast and efficient  
process helps prevent heat damage  
for less frizz and more shine.  
Hang Loop  
 
No matter what style you ultimately achieve with this  
dryer and a brush, (your hairdresser may recommend  
a particular one), the first step is to remove most of  
the moisture from your hair. Start by blotting hair dry  
with a towel (rubbing creates tangles).  
COOL SHOT  
Once you fully dry your hair and fashion the style, press  
the Cool Shot Button to setthe style.  
MAINTENANCE INSTRUCTIONS  
1. Do not attempt to repair the appliance yourself.  
Return to Remington Customer Service.  
BEGIN TO SHAPE  
With a wide tooth comb, start at the nape of your  
neck and comb out small sections of hair at a time.  
Put the dryer on HIGH Air Speed and your desired  
heat setting. Rotate nozzle quickly all over head,  
fluffing up hair with fingers. Starting at nape of neck  
and moving up, brush hair from scalp out to the  
ends, always following movement of brush with dryer  
(keep dryer 8 inches from scalp). Then quickly do the  
same thing in the direction hair is to go, starting from  
the front and sides of head down to the nape,  
brushing from scalp out to the ends.  
2. Keep all intake openings clear of dust accumulation.  
See Cleaning Instructionsbelow. No other  
maintenance or lubrication is required.  
3. If the cord becomes twisted due to use, periodically  
straighten. Store appliance and cord where they will  
not be damaged. Do not wrap cord around dryer.  
CLEANING INSTRUCTIONS  
1. This dryer needs minimum maintenance to ensure  
the best performance and long life.  
2. The air filter should be cleaned regularly since a dirty  
or clogged filter will impair the efficiency of the dryer.  
3. To clean air filter, make sure dryer is turned off and  
plug is pulled out of socket. Use soft bristle brush or  
damp cloth to remove any particles that are lodged  
in grille openings.  
Hair should now be damp and ready for styling.  
Adjust air speed and heat setting and you’re  
ready to style.  
HAIR TYPE  
RECOMMENDED SETTINGS  
STORAGE  
Short and Curly  
Low Airflow  
High Airflow  
Low Airflow  
High Airflow  
Low Airflow  
High Airflow  
High Airflow  
Low Heat  
When not in use, unplug the unit. Allow it to cool and  
store out of reach of children in a safe, dry location.  
Short and Sculptured  
Mid-Length and Sculptured  
Mid-Length and Sleek  
Mid-Length or Long and Curly  
Long and Sculptured  
Long and Sleek  
Medium Heat  
High Heat  
Never wrap the cord around the appliance as this will  
cause the cord to wear prematurely and break. Handle  
cord carefully for long life and avoid jerking, twisting  
or straining, especially at plug connections.  
High Heat  
Medium Heat  
Optima Heat  
Optima Heat  
 
No matter what style you ultimately achieve with this  
dryer and a brush, (your hairdresser may recommend  
a particular one), the first step is to remove most of  
the moisture from your hair. Start by blotting hair dry  
with a towel (rubbing creates tangles).  
COOL SHOT  
Once you fully dry your hair and fashion the style, press  
the Cool Shot Button to setthe style.  
MAINTENANCE INSTRUCTIONS  
1. Do not attempt to repair the appliance yourself.  
Return to Remington Customer Service.  
BEGIN TO SHAPE  
With a wide tooth comb, start at the nape of your  
neck and comb out small sections of hair at a time.  
Put the dryer on HIGH Air Speed and your desired  
heat setting. Rotate nozzle quickly all over head,  
fluffing up hair with fingers. Starting at nape of neck  
and moving up, brush hair from scalp out to the  
ends, always following movement of brush with dryer  
(keep dryer 8 inches from scalp). Then quickly do the  
same thing in the direction hair is to go, starting from  
the front and sides of head down to the nape,  
brushing from scalp out to the ends.  
2. Keep all intake openings clear of dust accumulation.  
See Cleaning Instructionsbelow. No other  
maintenance or lubrication is required.  
3. If the cord becomes twisted due to use, periodically  
straighten. Store appliance and cord where they will  
not be damaged. Do not wrap cord around dryer.  
CLEANING INSTRUCTIONS  
1. This dryer needs minimum maintenance to ensure  
the best performance and long life.  
2. The air filter should be cleaned regularly since a dirty  
or clogged filter will impair the efficiency of the dryer.  
3. To clean air filter, make sure dryer is turned off and  
plug is pulled out of socket. Use soft bristle brush or  
damp cloth to remove any particles that are lodged  
in grille openings.  
Hair should now be damp and ready for styling.  
Adjust air speed and heat setting and youre  
ready to style.  
HAIR TYPE  
RECOMMENDED SETTINGS  
STORAGE  
Short and Curly  
Low Airflow  
High Airflow  
Low Airflow  
High Airflow  
Low Airflow  
High Airflow  
High Airflow  
Low Heat  
When not in use, unplug the unit. Allow it to cool and  
store out of reach of children in a safe, dry location.  
Short and Sculptured  
Mid-Length and Sculptured  
Mid-Length and Sleek  
Mid-Length or Long and Curly  
Long and Sculptured  
Long and Sleek  
Medium Heat  
High Heat  
Never wrap the cord around the appliance as this will  
cause the cord to wear prematurely and break. Handle  
cord carefully for long life and avoid jerking, twisting  
or straining, especially at plug connections.  
High Heat  
Medium Heat  
Optima Heat  
Optima Heat  
 
Full Two-Year Warranty  
Remington Products Company, L.L.C. warrants this product  
against any defects that are due to faulty material or work-  
manship for a two-year period from the original date of  
consumer purchase. This warranty does not include damage  
to the product resulting from accident or misuse.  
If the product should become defective within the warranty  
period, we will repair it or elect to replace it free of charge.  
We will return your product, transportation charges prepaid,  
provided it is delivered prepaid to: Remington Products  
Company, L.L.C. 60 Main Street, Bridgeport, CT 06604,  
Attention: Service Department. Include a letter indicating the  
reason for the return.  
REMINGTON SHALL NOT BE RESPONSIBLE FOR ANY  
INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES.  
This warranty gives you specific legal rights and you may  
also have other rights which vary from state to state. Some  
states do not allow the exclusion or limitation of incidental,  
special or consequential damages.  
REMINGTON MONEY BACK OFFER  
If within 30 days after you have purchased your Remington  
dryer, you are not satisfied and would like a refund, take back  
the dryer and sales slip indicating purchase price and date of  
purchase to the retailer from whom the dryer was purchased.  
Remington will reimburse all retailers who accept this item  
within 30 days from date of purchase. If you have any  
questions concerning the money back guarantee, please  
call 1-800-736-4648.  
125 VAC, 60Hz, 1875W  
This product is Listed by Underwriters  
Laboratories.Inc. and bears the mark.  
Questions or Comments: Please call 1-800-736-4648  
Remington Products Company, L.L.C.  
60 Main Street  
Bridgeport,CT 06604  
MADE IN CHINA  
Remington and ProAir are trademarks of Remington Corporation,L.L.C.  
©2003 R.P.C.,L.L.C.Rev. 7/03 Job# WPCO3-084 Part# 14066  
 

Radica Games Games I5009 User Guide
RCA Washer YVXR1040VWW User Guide
Revolabs Microphone 03 hdvenucn User Guide
Roland Car Stereo System MKS 7 User Guide
Russell Hobbs Microwave Oven RHM2018 User Guide
Samsung Air Conditioner CHCEAM User Guide
Samsung Computer Drive HM250HJ User Guide
Samsung DVD Recorder DVD R4000 User Guide
Samsung Microwave Oven SRH1230ZG User Guide
Samsung Security Camera SCC C6407 User Guide